We like to share product recommendations with you and hope you like them! Just to make you aware Water Filter Data may collect a small share of sales or other compensation from the links on this page.


Shallow Well Pumps are an outdoor appliance usually used to supply a building with water from a well, but can it used in a variety of other scenarios where you need high-quality suctions to transport some kind of liquid to another location or alternatively to remove the liquid from that particular place.

Due to their popularity, there are hundreds of different brands selling their own shallow well pumps, so it may be difficult, especially if you do not have a lot of knowledge about this subject to choose the best shallow well pump for you.

But do not worry, because in this article, we are going to be reviewing and comparing the top 8 best shallow well pumps as well as providing you valuable information about how to use and choose the right one for your needs.


Best Shallow Well Pumps

  1. Flotec FP4012-10 1/2 HP Shallow Well Pump Jet
  2. BurCam 506547SS SW Stainless Steel Jet Pump/Tank
  3. Acquaer 1 HP Dual-Voltage Pump With Injector Kit
  4. Happybuy Shallow Well Jet Pump and Tank
  5. WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump
  6. Homdox 1.6HP Stainless Shallow Well Pump
  7. Goulds-J7S Single Nose Shallow Well Goulds-Jet Pump
  8. EXTRAUP 1HP Stainless Steel Electronic Portable Shallow Well Pump


Flotec FP4012-10 1/2 HP Shallow Well Pump Jet

This product is manufactured by the namesake company Flotec Industrial Limited, which is based in the United Kingdom and specializes in the manufacture of a wide variety of hardware and also parts for construction and mechanical work.

Priced in the middle of the price range, this product is very lightweight, and although it has a lot of different uses, it is especially good at pumping out water from the ground thanks to its fiberglass reinforced thermoplastic, which helps make the machine a lot more durable against corrosion and also stops sand and other particles from getting inside and causing damage or blockage.


  • Due to the simplicity of the product, it is very easy to use even for buyers who have never used a shallow well pump before.
  • Has a max pumping level of 25 feet which is great for a pump of this price.
  • The design of this product makes sure that it does not overheat.
  • Good performance with a PSI of 40.
  • Lightweight so it can be easily transported.


  • The pump is very noisy compared to the other products on this list due to no noise insulation features being included.
  • Reportedly breaks down after just a few months of heavy use.

Check Price

BurCam 506547SS SW Stainless Steel Jet Pump/Tank

The BurCam Stainless Steel Jet Pump is a high-performance water pump that offers you the ability to pump water from a well to your home, and do not have to worry about rust getting in your drinking water.

Additionally, there is a ‘butyl bladder’ that makes sure that no condensation occurs inside the machine and any other external accessories that may be attached to it this is done by separating the air and water so there is no contact between them.


  • Works without any problems during the winter and cold climates.
  • You do not have to worry about this shallow well pump rusting as it is made from stainless steel which as long looked after does not rust due to the metal alloys it is made from as well as some of the other plastic parts.


  • Rubber taste reported by people who have drunk water pumped by this machine, although it is not a danger to your health it is not pleasant.
  • More complicated to install compared to the other shallow well pumps on this list.
  • Able to continuously work for many years without breaking.
  • Ability to get in contact with the manufacturer and request spare parts if needed.
  • An active customer service team that will assist you with any questions or problems that you may have.

Check Price

Acquaer 1 HP Dual-Voltage Pump With Injector Kit

A popular product that has dual voltage capabilities with the ability to accept both 115V and 230V with the machine being factory wired for 230V. Some of the parts that make up this shallow well pump are made out of plastic but they are all protected by a durable iron cast.

Additionally, this product comes with a great two-year warranty which will give you more than enough time to return the product if it comes with any defects.


  • A quiet pump so you can leave it running during the day and even night without disturbing the people living around you.
  • Strong pump that is able to pump at pressure levels of 80.
  • When you buy this pump you are getting good value for money.
  • Comes with a pressure regulator built-in with the pump
  • Ability to attach other accessories with ease.


  • Loses performance quickly after 15 feet of depth.

Check Price

Happybuy Shallow Well Jet Pump and Tank

A shallow well jet pump that can be used for pumping fresh well water and also for irrigation. It is made using stainless steel which provides a beautifully smooth surface as well as added durability that guarantees that this pump will work for years to come after you have purchased it.

Moreover, this shallow well pump comes with an automatic booster system that makes sure that the pressure that the pump operates at does not change while it is working as well as also helping you save electricity.


  • Ability to connect this water pump to a garden hose allowing you to manage your garden much more easily and water with water from your well.
  • A very powerful pump for its price and size with a power output of 750w.
  • Fast delivery and a responsive customer service team are available to help if needed.
  • It does not consume a lot power to run therefore it can save you a lot of money in the long term.


  • The instructions provided with this product are generic and not specifically for this water pump model.
  • Difficult to wire up and install.

Check Price

WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump

Wayne is one of the best-known brands for shallow well pumps with the brand being known for its high quality yet affordable prices.

The pump is built in the United States but using mostly foreign-made parts. This shallow well pump is powered by a dual voltage motor that is set at 240V when you first buy it however it can be altered to 120V as well. You also have the ability to alternate the PSI between 30 and 50.


  • A large flow rate of 420 gallons per hour makes this pump a suitable option for the majority of household and small construction projects.
  • Compared to most of the other pumps on this comparison review article, you have the ability to customize the performance of this product to your needs.
  • Suitable for pumping fresh and clean water with no need to worry about contamination or rust getting in the water.
  • The entire machine is supported using a strong iron cast preventing the machine from being damaged from reasonable fall damage.
  • A highly efficient motor that guarantees both great performances and also energy efficiency.


  • This product usually breaks after the 3-year warranty runs out.

Check Price

Homdox 1.6HP Stainless Shallow Well Pump

Another stainless steel shallow well pump that is also advertised as suitable for a variety of other jobs such as for gardens, swimming pools, playgrounds and also tall buildings.

Despite being one of the lowest-priced pumps on this best shallow well pump review article, it comes with a massive 700 gallons per hour flow rate.

Furthermore, the Homdox 1.6HP Stainless Shallow Well Pump is built for portability in mind so you can easily transport it anywhere you need it and carry it up multiple flights of stairs by yourself.


  • Can handle warm water of up to 55 degrees Celsius.
  • Max pressure of 66 makes it ideal for irrigation and other agriculture jobs that require such a high-pressure rate.
  • A simple product with a few features that anyone can set up.
  • Plastic and stainless steel are the two materials that make up this pump so there is no risk of rusting.
  • A handle is built into this pump to make it easier to carry.


  • It comes only with a half year warranty which is an extremely short amount of time.
  • Lacks some of the power customizability options present in other pumps on this list.

Check Price

Goulds-J7S Single Nose Shallow Well Goulds-Jet Pump

Goulds-J7S Single Nose Shallow Well Jet Pump is the most expensive pump on this list, and it shows with the pump coming with a total of twelve components as well as being available in a few different smaller and larger models to better suit the needs of the customers.

The entire machine is enveloped in a light blue iron casting that protects all the delicate parts inside from getting damaged or breaking.

Furthermore, there is an overload feature that allows you to max out the machine to its maximum capabilities although you need to keep in mind that this can damage your shallow well pump.


  • Very long product durability that has arguably one of the longest product lifetimes on this list.
  • Two-year warranty provided with this shallow well pump.
  • Pressure regulator included allowing you to control performance and also protect your pump from unnecessary damage.
  • In the long term, it can be cheaper as it will have more efficient performance and also last longer thanks to better parts.
  • A quiet machine that allows it to be used anywhere and any time of day.


  • Very expensive and majority of people do not require such a pricey option.

Check Price

EXTRAUP 1HP Stainless Steel Electronic Portable Shallow Well Pump

The EXTRAUP Portable Shallow Well Pump is one of the best options for beginners and also individuals who are not going to be using this product often for long periods of time. Even though this pump is cheap it can still do a good job with a max suction height of 23 feet which is the same as other pumps on the market that are twice the price.

Furthermore, you can slightly improve the performance and use by adding third party accessories that you may already own to the pump.


  • One of the most affordable shallow well pumps them, costing currently less than $100.
  • A handle is built into the design of this pump allowing it to be transported anywhere with ease.
  • A high PSI of 58 which is impressive for such a cheap water pump.
  • 1-year warranty included with this shallow well pump.
  •  consumes very little energy.


  •  Will stay switched on and pumping until you manually turn it off.
  • It does not come with a lot of features instead it is just a basic water pump.
  • A large part of this shallow well pump is made up of plastic which means that it can easily break.

Check Price

What Are Shallow Well Pumps Used For?

Shallow well pumps are generally used for household purposes such as attaching a hose or even a sprinkler either directly on the pump if possible or through a third-party accessory in order to water your garden using a water source that is most likely stored underground in a well for example.

It is important to note that these kinds of pumps do not work and will get damaged if submerged underwater therefore if they are pumping water from a well they need to be on above on the ground, they do not break if wet so you don’t have to worry about rain or spilling some kind of liquid on top however they should not become submerged in any way as this causes a big risk of damage.

The uses for a shallow well pump are essentially limitless, but the main characteristics are that you are pumping water from an underground source and then either disposing of the water or using it for another purpose.

Alternatively, shallow well pumps are also used to transport water up heights for example if from the ground floor to the second floor of a house or a block of apartments.

The Shallow Well Pump Buying Guide

Overall Capacity

The overall capacity does not mean how much water your pump is able to store but it instead means how much water your pump can transport as well as the depth that is able to effectively pump at.

These two measures can be calculated by looking at the flow rate, PSI which stands for ‘pounds per square inch’ and it is used to maximize the pressure capabilities as well as the maximum depth that is outlined by the manufacturer.

Although all of these measurements matter the most important one is the recommended depth or otherwise known as the max-height, for the average shallow well pump the maximum ranges between 20 to 25 feet with the maximum slowly increasing as you get to the more advanced and expensive shallow pump models and increases even more when you get to the other genres of pumps such as well pumps which are designed for deeper wells or to pump up at bigger heights.

If you try and pump at the higher than the recommended heights you risk breaking your machine, while the flow rate and PSI measurements should also be taken into account but just as long as the recommended height is properly met they will just affect the speed that the water is pumped at.

Thermal Protection

The thermal protection is related to the pump overheating due to the heat that will be generated by the motor, despite this being important not all pumps have adequate thermal protection with the cheaper models generally being the main culprits.

Some types of thermal protection is for the manufacturer to include the necessary amount of breathing gaps in the protective casting of the shallow well pump in order to allow the heat to escape and be replaced with colder air from the outside.

Additionally, if the pump is made from metal it will be less to melt as long as the casting shell is thick compared to if you decide to use a plastic casting that is prone to melting due to heat.

However, the most effective way to prevent damage due to overheating is for the pump to have a feature that automatically turns it off once the shallow well pump heats up to a certain temperature.

Noise Pollution

Noise pollution is one of the most important aspects that you need to consider as you may have the best shallow well pump on the market but if you are not able to use it without annoying your neighbors, family or even getting in trouble with your landlords it will be no use to you.

It is important to point out that every water pump will make at least some noise especially if running at full performance however there are shallow water pumps out there that do have noise-canceling features or have simply a quieter motor which is the culprit that makes all the noise.

Regardless of how quiet your shallow well pump is, it is always good to use it at reasonable times of the day such as midday when the majority of people are awake rather than early in the morning or at nighttime. Furthermore, the noise cancellation features will not make much of a difference if you are running multiple shallow well pumps.


The material that a pump is made from is one of the main aspects that decide the final cost of the product. Without a doubt, the best materials out there for a shallow well pump to be made from is metal with the casting usually being made from iron, stainless or some kind of variant of one of the two types of metals.

Although in all shallow well pumps the inside components such as the motor will be made from metal, the manufacturers of the lower-priced products will try to increase their profit margins by using less metal and more plastic or lower quality metals that are prone to melting and also rusting.

Furthermore, it is important the width of the material used, as the manufacturer can also try and trick people by using thinner pieces that are again more prone to getting damaged.

Protection From Dirt

Due to the main purpose that a shallow well pump is made for, it will spend a lot of time on the ground which in most cases will be on some kind of patch of grass, dirt or sand.

The motor is the most important part of the pump as it is what powers all of the other components and also if applicable the accessories with even the smallest bits of debris or sand have the ability to damage a motor if they get inside due to the speed that the parts in the motor move at.

What is even worse is that you will not know that particles have got inside and are damaging your machine until it is too late and significant damage has been caused or alternatively the machine has totally broken down.

The cheapest models will in majority of cases not have adequate protection, however, when you get to the models that cost over $100 you will find that they have a much more advanced iron casting that also intricate internal parts for extra protection.

Regardless it is tricky to offer protection from sand and debris as the motor needs breathing holes for ventilation, therefore, you need to also take the necessary steps such as putting some kind of mat or dust sheet to offer at least some protection from the flying dust and debris that will be getting blown around by the wind from the motor.

Pressure Controls

Pressure controls are another useful feature that you should look out for, but it is only really needed if you are going to be using your shallow well pump very often or for tasks that require a special pressure specification.

Furthermore, controlling the pressure that your pump operates at allows you the choice of prolonging its lifetime as on average the lower pressure levels that a pump works at the longer it will be able to function properly due to higher pressure levels requiring more power consumption and also work by the motors.

This feature is become a lot more common now with even the lowest cost models starting to include it due to its popularity. However, even if you have happened to buy a shallow well pump that does not have pressure controls built into it, you should not worry as you can still buy accessories that let you do just that.

Product Warranty

A good giveaway of whether a product is going to last a long time and how well built is the product warranty, if a product has a very short product warranty it shows that the manufacturers do not have the confidence that their own product will not breakdown.

Apart from the total length of the product warranty, it is also important the type of warranty, with the best type of warranty being the ‘full warranty’ which promises you a full refund or replacement if there are any problems however very few companies offer this warranty with the ‘limited warranty’ type instead being the most popular option that depending on the terms and conditions you can be provided with replacement parts or a full replacement if the problems are due to the product arriving faulty.

You can simply talk to the customer service who can give you advice on how to sort out the problem and also identify the problem itself.

Additionally, it is recommended that you take a look at the reviews about the customer service provided by the manufacturers, as that is also important as there is no point in having a long warranty when you are not going to be serviced properly.

Power Source

One of the most overlooked features, when people are buying a shallow well pump, is taking a look at the power source required by the product that you are trying to buy and also the capabilities of the plugs that you have at home.

More often than not, someone buys a shallow well pump and then realizes that the voltage required by the pump to work cannot be supplied by the plug sockets that they have available so they have to buy other appliances in order to make it work which just costs extra time and money for absolutely no benefit.

Thankfully a large part of the shallow well pumps that are sold today are dual voltage which covers the majority of the most common voltage requirements in the United States however it will cost you nothing to double-check in order to avoid a setback to your project as well as extra money to buy other tools in order to fix the problem.

Advantages of Using Shallow Well Pumps

Majority of Pumps Can Reach Low Depths

One of the main advantages of shallow well pumps is that they are able to raise reasonably low depths that meet all the needs and requirements by everyday household users.

This may not seem like a big deal but it is actually extremely useful as it allows you to drain out holes and wells up to 25 feet which is the average depth covered by shallow well pumps, using just a device that costs a few hundred dollars max as well as pay for a bit of electricity in order to power the machine.

Without a shallow well pump the task of for example draining a hole out of water will be ten times more time consuming and expensive.

Other tasks that are simplified thanks to the low depth capabilities of shallow well pumps is the ability to transport water up heights for example through different levels of a building.

Ability to Maintain Water Pressure

Shallow well pumps are able to maintain the pressure without any issues or drops in performance, this has a lot of advantages such as allowing you to keep on track with your project as well as allowing you to predict the amount of time it will take to complete a certain task or construction project.

Furthermore with a lot of the mid-range to high-end products you can regulate the pressure to your liking and needs which is great if for whatever reason a job requires a certain type of pressure.

You do have to keep in mind that a shallow well pump is powered using a motor which will start to wear down and eventually break down which is a process that is sped up operating your water pump at very high pressure or even in overload mode which is available in a lot of the higher-end shallow water pump models out there.

Safe to Use

Shallow well pumps are a very safe way to transport water from one place to another as it helps avoid accidents that can occur if you try to for example drain a well or a hole without such as pump or injuries if you try to carry hundreds of gallons of water up multiple levels in a building.

One of the main examples of accidents that using a shallow well pump prevents is the possibility of a hole collapsing on top of you if rather than using a shallow well pump you decide to get into a hole and start draining it using a bucket.

All pumps come with a protective casing that protects your hands from the rotating motor inside although it is still strongly recommended not to handle the machine while it is in operating to prevent accidents.

Furthermore, even when the pump heats up you will be protected from the true level heat in the core of the shallow well pump with all mid-range to high-end models having an automatic switch-off feature that removes the chance of a fire starting due to the device overheating.


There are many uses out there for a shallow well pump, it can be very helpful in various types of construction work where you need to transport water around including up limited heights.

Adding to this, it can be used everyday uses such as filling up your swimming pool, watering your grass and garden plants as well as providing your home with drinking water.

Pumps like these do not have to use a well as the source of their water, they can even be connected to a normal faucet in your home and then you can transport the water to another part of the house for example to fill your jacuzzi or swimming pool.

Do Not Break Easily

All shallow well pumps are able to last years with admittedly the cheapest ones being on average able to work for a few months however this is based on the assumption that you are going to be constantly using them and for long periods of time.

In reality, the majority of people will not be using their shallow well pump for some massive project that requires their pump working for the whole day every day means that when you buy a water pump you are making a long term investment that you will be able to use for many years to come.

Easy Installation

Even though some water pumps come with a lot of customization features they are all very straightforward machines to use, you simply just have to connect a hosepipe to one end of the machine, connect the machine to an electrical source and then just turn it on using some variant of a turn on/off button on the machine.

Furthermore, most machines come with a detailed user manual that explains all the features and how they work. If you have any problems after that you can just ask other users of your model of the water pump or get in contact with the manufacturers of the product directly.

Can Save You a Lot of Time

One of the main selling points of shallow water pumps is that they are going to save you a lot of time as you can simply set up the machine and turn it on to do its job while you focus on another task in your construction project or simply do some work around the house for example.

But never go out and leave your shallow water pump unattended.


Although the cheapest shallow well pumps out there cost from around $80 onwards, you need to look at it from the perspective of how many times you are going to be using this water pump.

For example if you are going to be using it for many years to come for hundreds or even thousands of times, if you divide for example $200 by 2000 uses that comes to only 20 cents per use excluding of course the minimal costs of electricity.

Maintenance Tips for Shallow Well Pumps

Maintenance is an essential part of prolonging the life of anything especially machinery, the first thing that you can do is see if there have been any changes or damage visually to your shallow well pump.

This is very quick to do and it will allow you to identify and major damage or degradation, however, it will not be effective in catching internal problems or drops in performance.

The best way to test a shall well pumps is to check the performance by analyzing aspects such as flow rate as well the PSI which is a term used for pressure.

This is easy to do, all you need is a bucket or even better a measuring jug and then analyze the rate that it fills up with water with a stopwatch which you can then easily add to a formula and use to analyze the performance.

Another aspect that you can measure if you want to get technical is to test the water that is coming up for traces of rust using specialized water tests that you can buy from Amazon and all other major online retailers for a low cost.

If you have happened to identify an issue it is important to consider if it is worth spending hundreds of dollars as well as many hours fixing it or researching mechanics to fix it or just purchasing a replacement. In the majority of cases if the shallow well pump is old and is suffering from multiple major issues it is best to just purchase a replacement.

Difference Between Shallow Well Pumps & Submersible Pumps

A submersible pump is able to do the same job as a shallow well pump however there are a few major difference, the first is that a shallow well pump is not able to function submerged underwater or other liquids as it will lose performance efficiency as well as the high chance of it breaking down.

Furthermore, submersible pumps are able to pump at bigger depths which make them the better choice if you are looking to pump water up from depths of over 25 feet.

However, for most minor construction projects or for household use, a shallow well pump will do just time.

And of course, the major difference between the two is the price with submersible pumps having more advanced features but being much more expensive than the shallow well pump. If you don’t currently require the advanced features of a submersible pump it is best to buy a shallow well pump and then upgrade if needed later on.


Can You Use a Deep Well PUMP on a Shallow Well?

Yes, you can use a deep well pump on a shallow well without any problems however it is not required therefore you should spend an extra amount of money for the most expensive deep well pumps when a shallow well pump will do the job unless you already happen to have a deep well pump at your disposal.

What Is the Difference Between a Deep Well PUMP and a Shallow Well PUMP?

Deep well pumps are designed to be able to pump at much larger depth compared to a shallow well pump, with deep well pumps being able to pump up to depths of 400 feet while shallow well pumps generally pump up to depths of 20 to 50 feet. Deep well pumps can also work submerged and are also known as submersible pumps.

What Is Considered a Shallow Well?

A shallow well is generally considered to be 50 feet deep or 15 meters which may seem like a lot but it is nothing will some wells being hundreds of feet or meters deep.

How Do Shallow Well Pumps Work?

Shallow well pumps are placed above the ground as they are not able to operate while submerged, once you turn it on and have set the pressure and flow settings a motor-powered using electricity will create suction that will take in water through a hosepipe and transport to the chosen destination.

Is a Pressure Tank Required for a Shallow Well PUMP to Work?

No, a pressure tank is not a requirement for a shallow well pump to be able to do its job, however it can improve the performance especially when pumping up heights.

Additional Accessories to Consider

Pressure Relief Valve

Used to regulate the pressure in your shallow well pump, once you initiate the pressure relief valve you will have fluid and also air being released from the machine until the pressure has come down to a level of your liking.

Water Tank

Used to store water collected from the pump which in most cases is used inside a property to provide your traps and water appliances with water that is stored in your water tank that is connected from the shallow well pump. Water tanks are never included as an additional accessory when buying shallow well pumps and instead need to be bought separately with many different varieties in sizes being available.

Foot Valve

Used to prevent water that has been sucked up by the pump but still in the pipe from flowing back down in the well or the source that the water was originally taken from.

They are designed using a fairly simple concept that allows water to flow in when the suction from the pump is initiated however they do not let the water to simply fall back down due to the force from its weight.

Pressure Switch

A type of switch used to regulate and alter the pressure of your shallow well pump so it coincides with the requirements of the task as well as your personal specifications.

Another use for a pressure switch is to stop pumps from ‘dry running’ in other words continuing to work even when they are not sucking up and pumping any water from the well.

Pressure Gauge

Used to calculate and then display the amount of pressure generated by your pump allowing you to then react in the according way of maintaining the same pressure or altering it.

There can be a lot of different types of pressure gauges that measure a variety of things such as the pressure of the liquids, the pressure of the gases or air and even the condensation pressure with generally the higher end that a shallow well pump is the more pressure gauges it will have that allow for better regulation and maintenance


To conclude, shallow well pumps are a very useful piece of machinery that allows you to carry water from one place to another without the need for any extensive infrastructure or construction work.

In this article of the best shallow pumps we covered the top 8 options available, all of them are able to get the job done however some of them have a much higher level of performance but come with the expected downside of a higher price.

If you are looking to save a bit of money then the best cheap options available are the EXTRAUP Portable Shallow Well Pump and Homdox 1.6HP Stainless Shallow Well Pump which despite their low prices come with a bunch of great features such as a max pumping depth of 23 feet which is same as other pumps on this list that are more than twice the total price.

However, you need to keep in mind that this shallow well pump is not for extensive and will break down quickly if that is what you decide to use it for.

Two other options for individuals that do not want shallow pumps for any big projects are the Flotec FP4012-10 1/2 HP Shallow Well Pump Jet, BurCam 506547SS SW Stainless Steel Jet Pump/Tank and the Happybuy Shallow Well Jet Pump and Tank which are nearly double the price of the cheapest options on this review article however they are made from sturdier material that will last you a lot more time and may even end up being cheaper in the long term.

However, out all of the four mid-range options, the WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump is the best one has a PSI of 50 which is higher than that of both the Flotec FP4012-10 1/2 HP Shallow Well Pump Jet and also the Happybuy Shallow Well Jet Pump and Tank. Additionally, it has the longest warranty out of all eight products that we have reviewed in this article with a 3-year limited warranty with the brand Wayne being well known for its high-quality customer service who are more than happy to answer any questions that you may have.

Finally, you have the Acquaer 1 HP Dual-Voltage Pump With Injector Kit and the Goulds-J7S Single Nose Shallow Well Goulds-Jet Pump which both cost over $400 each however they are built using the highest quality material that limits the chances of overheating and other advanced features such as overclocking which can be useful in the rare cases that they are required and also the ability to pump up much deeper depths.

It is without a doubt that these two models are superior to all the others, but the true point to consider is if they are necessary which depends on your personal situation. If you are going to be just filling up your swimming pool then you should go with one of the cheap to mid-range models but if you are going to be using these pumps to get water for your home then the expensive models highlighted in this paragraph are worth the investment.